High-Torque Motors SIMOTICS HT Series HT-Direct
Brand: Siemens AG
Images are representations only.
High-Torque Motors SIMOTICS HT Series HT-Direct
Brand: Siemens AGThe high-torque motors are permanent-magnet synchronous motors that can provide high torques at low speeds directly at the driven machine.
High efficiencies and good power factors can also be achieved at low speeds as a result of the permanent magnet rotors.
The motors are offered as a harmonized system together with SINAMICS drive converters.
The HT-direct motor / SINAMICS drive converter represents a drive solution with a long service lifetime but with low lifecycle costs and high efficiency for applications with low operating speeds.
Features- With slow-running drives, the efficiency of the HT-direct series is approximately 2 to 3% higher than for similar drive concepts, if gear or gear steps can be saved. For a 1000 kW motor, this results in a saving of 33 kW, which is an annual saving of approximately 15000 € for an operating time of 8 hours per day
- High pole design in combination with permanent magnet technology ensures that the space requirement and mass of the motors are lower than for similar asynchronous machines. The slow-running motors of the HT-direct series obviate the need for a gearbox in many cases (reduction in engineering, assembly and maintenance outlay, lower investment and lower operating costs)
- Efficient, optimally matched drive system, SINAMICS converter and HT-direct motor for operation with or without encoders
- Thanks to their long service life (nominal bearing lifetime > 60000 hours), HT-direct high-torque motors are maintenance-free and have a high availability especially for applications in which a gearbox can be omitted
- Environmentally-friendly system (where applicable, no disposal of gearbox oil is necessary; energy-saving drive system)
- Customization is possible
Specifications
Brand
Rated Torque
- 6.000 - 42.000 Nm
Rated Power
- 150 - 2.100 kW
Shaft Height
- 400 mm, 450 mm, 500 mm
Degree of Protection
- IP55
Rated Speed
- 200 - 800 min-¹
Rated Voltage
- 400, 460, 690 V
Cooling Method
- IC71W (water-jacket-cooled)
- IC416 (rib-cooled with forced air cooled)
- Paper Industry as Roller and Press Drive
- Marine Industry as Propeller Drive (Main and Auxiliary Drives)
- Mining Industry for Mill Drives
- Steel Industry e.g. for Shears
- Plastics Industry as Drive for Extruder Worms, Foil-Drawing Machines
- Crane Industry for the Widest Range of Applications
- Sugar Industry for Sugar Centrifuges
- Branch Chemical Industry, Oil & Gas
- Branch Water / Waste Water
