ISC40SJ Inductive Conductivity Sensor
Brand: Yokogawa Electric Corporation
Images are representations only.
ISC40SJ Inductive Conductivity Sensor
Brand: Yokogawa Electric CorporationThe ISC40SJ sensors are designed for use with the FLXA202/FLXA21 2-wire Analyzer, ISC202 2-wire transmitter and the ISC450G 4-wire converter.
This combination exceeds all expectations for conductivity measurement in terms of reliability, accuracy, rangeability and price performance.
This innovative inductive conductivity sensor provides highly accurate measurements over a wide measuring range (1 µS/cm to 1999 mS/cm) and process temperature range (-10° to 130° C, -10° to 105° C for ISC40SJ-TT) without changing the cell constant and conducting recalibration.
The erosion/abrasion resistant PEEK (Poly Ether Ether Ketone), which also features excellent chemical resistance in all solutions except Fluoric Acid or Oxidizing Concentrated Acids.
The PEEK sensor is provided with a rugged Stainless Steel mounting thread/nut/ gasket combination for ultimate flexibility in installation using bulk head installation technique.
There is also a wide range of holders and options available for reliable in-line or offline installation with double O-ring seals for long service life of the sensor.
The ISC40J have a large bore for optimal resistance to fouling processes and when properly installed, the flow will keep the sensor clean, to help avoid measuring errors.
Features- Inductive Conductivity technique for elimination of fouling and polarization errors.
- Wide bore sensors for long term stability.
- Installation flexibility due to wide range of holders and due to the use of universal bulkhead construction.
- A single sensor can maintain the high resolution and accuracy, and measure the conductivity in an extremely brood range.
- Minimum span: 100 μS/cm
- Maximum span: 1,999 mS/cm
Specifications
Approvals & Certifications
- TIIS Ex ia IIC T4 Intrinsic Safe
BSP Connection
- G 3/4"
Cable Length
- 16.4 to 65.6 feet (5 to 20 metres)
Cable Material
- Weatherproof Vinyl
Electrical Connectors
- Screw Terminal - R2 Screw-In Adapter
Flange Material
- 316 Stainless Steel - Flange Adapter
- PVC - Flange Adapter
- PVDF - Flange Adapter
Flange Size - 2” (DN 50)
- 2" (DN 50) - 150# ANSI
- 2" (DN 50) - JIS 10K
- 2" (DN 50) - PN 16
Flange Type
- Flat Face (FF)
- Raised Face (ANSI / DIN, JIS)
Flow Rate
- 5 m/sec - Max.
Measuring Range
- 1 μS/cm to 1,999 ms/cm
Mounting
- Bulkhead
Nut & Bolt Material
- 304 Stainless Steel - Retaining Nut
O-Ring Material
- Ethylene Propylene Copolymer Rubber
- FKM
Output Span - Maximum
- 1,999 ms/cm
Output Span - Minimum
- 100 μS/cm
Pressure Range
- psi: 0 to 300 (kPa: 0 to 2,070, bar: 0 to 20)
Process Temperature
- -10° to 105° C (14° to 221° F) - for Steam-Sterilisable Applications
- -10° to 130° C (14° to 266° F) - for Continuous Exposure
RTD Type
- Pt1000
Sensor, Probe Material
- 304 Stainless Steel
- PEEK
Wetted Materials
- 316 Stainless Steel - Adapter
- PVC - Adapter
- PVDF - Adapter
- All Applications Where Severe Electrode Fouling Prevents the Use of Contacting Electrodes
- All Applications Where the 6 Decade Rangeability is Necessary for Accurate Process Control
- All Ranges Except (Ultra) Pure Water Applications
- All Slurry Applications Where Conventional Systems Suffer from Plugging or Erosion
