WR5A/WR5V Free Range Type RTD Converter
Brand: Yokogawa Electric Corporation
Images are representations only.
WR5A/WR5V Free Range Type RTD Converter
Brand: Yokogawa Electric CorporationThe WR5A / WR5V is a compact, front terminal connection type signal conditioner that is connected to an IEC/JIS-standard resistance temperature detector (RTD) to convert temperature signals into isolated DC current or DC voltage signals.
Features- Selection of input type, input range setting, burnout setting, output adjustment, I/O monitoring, and loop back test can be made using the optional parameter setting tool (VJ77) or handy terminal (JHT200)
- For the Fahrenheit display, specify the option "/DF"
- Available for the combination with safety barrier (BARD700)
- WR5A and WR5V are also available in 2,000 Vac voltage withstand specifications
Specifications
Accuracy
- ± 0.1 % of Span or 0.1° C (0.18° F), whichever is greater - Pt100, JPt100
- ± 0.2 % of Span or 0.2° C (0.36° F), whichever is greater - Pt50
Burn-Out
- Burn-Out Time: 60 seconds, Max.
- Down
- Off
- Up
Consumption
- 50 mA at 24 Vdc - Power Consumption (WR5V)
- 65 mA at 24 Vdc - Power Consumption (WR5A)
Current
- 1 mA Approximately - RTD Detective Current
Dissipation
- 3 VA at 100 Vac - Power Dissipation (WR5V)
- 4 VA at 100 Vac - Power Dissipation (WR5A)
- 4.5 VA at 200 Vac - Power Dissipation (WR5V)
- 5.5 VA at 200 Vac - Power Dissipation (WR5A)
Electrical Connectors
- M4 Screw Terminal
Humidity
- 5 to 90 % RH, Non-Condensing - Operating Humidity
Insulation Resistance
- 100 MΩ min. at 500 Vdc between Input, Output & Power Supply (DC-Driven) & between Input, Output, Power Supply & Ground Mutually (AC-Driven)
Measuring Range
- -200° to 850° C (-328° to 1,562° F)
Mounting
- DIN Rail Mounting
- Rack-Mounted
- Wall Mounted
Operating Temperature
- 0° to 50° C (32° to 122° F)
Output
- 0-100 mVdc
- 0-24 mA DC
- 10 mV to 20 V - Span (DC)
- -10 to 10 Vdc
- 1-24 mA DC - Span
Power Supply
- 100-240 Vac (-15 %, 10 %), 50/60 Hz - AC Drive
- 24 Vdc ± 10 % (Ripple Content 5 % Peak-to-Peak or Less) - DC Drive
Power Supply Effect
- ± 0.1 % of Span or Less - Effect of Power Supply Voltage Fluctuations
Resistance
- 150 ohms or Less Per Wire - Allowable Leadwire Resistance
- 2 to 250 kΩ or more - Allowable Load Resistance (Voltage)
- 750 to 15,000 ohms or Less - Allowable Load Resistance (Current)
Response Time
- 200 ms, 63 % Response (10 to 90 %)
RTD Type
- JPt100 (JIS’89)
- Pt100 (IPTS-68: JIS’89 & ITS-90, JIS C 1604: ’97, IEC 751: '95)
- Pt50 (JIS’81)
Sensor, Probe Type
- 3-Wire RTD, IEC/JIS Standard Compliant
Span & Zero Adjustments
- ± 1 % of Span - Input Adjustment
- ± 10 % of Span - Output Adjustment
Supply Voltage
- 1,500 Vac for One Minute between Input, Output & Input, Power Supply - Withstanding Voltage
- 500 Vac for One Minute between Output & Power Supply - Withstanding Voltage
Temperature Effect
- ± 0.2 % of Span or Less for a Temperature Change of 10° C (18° F) - Effect of Ambient Temperature Change
Zero Offset
- 0 to 200 % - Zero Elevation (Output Current Signal)
- -100 to 200 % - Zero Elevation (Output Voltage Signal)
