TB461 / TB465 Insertion/Submersion Type Stainless Steel Electrode
Brand: ABB Group
Images are representations only.
TB461 / TB465 Insertion/Submersion Type Stainless Steel Electrode
Brand: ABB GroupRuggedly constructed of 316 stainless steel, these sensors withstand the most demanding processes and measurement requirements.
TB46X insertion / submersion sensors are easily installed into process lines and vessels by the 3/4"NPT insertion threads or immersed directly into fluids by the back threads.
TB46X hot-tap sensors are directly inserted and removed from lines and vessels without disturbing the process via either a 1-1/2" normal or 1-1/4" full port ball valve (provided separately).
This series is the most versatile offered by ABB.
Full spectrum conductivity measurement is achieved by the wide rangeability of the sensor.
Features- In-line / immersion
- Interchangeable and replaceable electrode tips
- Direct measurement above 100° C (212° F) without coolers with proper anti-flashing installation
- Retractable hot-tap
- Interchangeable and replaceable electrode tips
- Accidental sensor blowout prevented by antiblowout lip machined into sensor body
Specifications
Brand
Maximum Pressure
- Inline / Submersible: 1,550 kPa (15.5 bar, 225 psi) at 200° C (392° F)
- Hot-tap: 689 kPa (6.89 bar, 100 psi) at 200° C (392° F)
Maximum Temperature
- 200° C (392° F)
Body Material
- 316 Stainless Steel
Material of Construction
- Electrode & compression Fittings: 316 Stainless Steel
- Insulator: PEEK
- O-Rings: Viton, EPDM, Kalrez
- Compression Fitting: Nylon (Ball valve insertion only)
- Compression Fitting: Titanium
Measurement Range
- TB461: 0 to 2,000,000 μS/cm
Insertion Length
- 2.5" to 36"
Compression Fitting
- 1-1/4" NPT
- 1" NPT
- 1-1/2" NPT
Cable Length
- 1.5 to 30.5 m (5 to 100 ft)
- In-line / immersion:
- Boiler measurements
- Sewer monitoring
- Cooling towers
- Condensate
- De-ionizers and other water treatment applications
- Heat exchangers
- Concentration monitoring
- All other general conductivity measurements
- Retractable hot-tap:
- Boiler condensate measurements
- Pulp stock lines
- Sealed vessel monitoring
- All other general conductivity measurements requiring sensor insertion / removal without process disturbance
