Model ND230 Ao/DeviceNet Converter
Brand: Yokogawa Electric Corporation
Images are representations only.
Model ND230 Ao/DeviceNet Converter
Brand: Yokogawa Electric CorporationThe Model ND230 Ao/DeviceNet converter receives input of digital values (0 to 10,000) from OMRON’s SYSMAC PLCs or Yokogawa Electric’s FA-M3 PLCs via the DeviceNet, and converts them to 16 (1-5 Vdc) Analog output signals.
The Analog output signals can be coupled with Yokogawa M&C’s signal converter-the JUXTA D Series–via a dedicated cable.
The ND230 is designed for either wall mounting or DIN-rail mounting.
Specifications
Accuracy
- ± 0.1 % of Full Scale
Ambient Temperature Range
- 0° to 50° C (32° to 122° F)
Channels
- 24
Communication
- Baud Rate: 125, 150 or 500 Kbps
- DeviceNet Bus
Connection Pin-Out
- 14-Pin Plug-In Converter
Consumption
- Approximately 3.4 VA (100 Vac)
- Approximately 5.8 VA (240 Vac)
Distance
- 0 to 1,640 ft (0 to 500 metres): with Transmission Speed 125 Kbps
- 0 to 328.1 ft (0 to 100 metres): with Transmission Speed 500 Kbps
- 0 to 820.2 ft (0 to 250 metres): with Transmission Speed 250 Kbps
Enclosure, Body Material
- ABS Resin
Humidity
- 5 to 90 % RH, Non-Condensing - Normal Operating Conditions
- 5 to 95 % RH, Non-Condensing - Transport/Storage Conditions
Indication
- LED Indicator: RDY, MS & NS
Insulation Resistance
- 100 MΩ min. at 500 Vdc between any Two Terminals
Mounting
- DIN Rail Mounting
- Wall Mounted
Output
- Configration: 1-5 V Analog Output
Output Cycle
- Approximately 250 ms / 16 Outputs
Power Supply
- 100-240 Vac (-15 %, 10 %), 50/60 Hz
Power Supply Effect
- ± 0.1 % of Full Scale, Max.
Storage Temperature
- -40° to 70° C (-40° to 158° F)
Supply Voltage
- 100-120 Vac
- 2,000 Vac/minute - Withstand Voltage between Any Two Terminals Among the ND220 Output, DeviceNet Output Terminals, Power Supply & Grounding Terminals
Switch Type
- DIP Switches - 0 to 63 Node Address Setting
Temperature Change
- 10° C (18° F)/hr, Max.
Temperature Effect
- ± 0.2 % of Full Scale, Max.
